|Name:||80m/min 1000w Metal Laser Cutting Machine||Power (watt):||1000w|
|Key Selling Points:||Automatic||Cutting Area:||3000mm*1500mm|
|Feature:||High Productivity , High Accuracy||Cutting Thickness:||30mm|
|Laser Type:||Fiber Laser||Cooling Method:||Water Cooling|
|Service System:||Field Installation, Commissioning And Training||Cutting Speed:||80m/min|
|Applicable Industry:||Building Material Shops,Manufacturing Plant||Applicable Material:||Metal|
30mm CNC Laser Cutting Machine,
3000mmx1500mm CNC Laser Cutting Machine,
YAG Laser Cutting Machine
Sheet metal fiber laser cutting machine
●High cutting speed: The cutting speed of fiber laser metal cutting machine is 2-3 times that of other laser cutting machines.
●Easy to operate: no need to adjust the optical path for optical fiber transmission. Flexible, simple and convenient instant cutting.
●Excellent laser beam quality: the focused laser spot is smaller, has a super light guiding effect, smaller deformation, higher efficiency, and better processing quality;
●High cost performance: The photoelectric conversion rate is as high as 25-30%. The power consumption of this fiber laser cutting machine is only 20%-30% of the traditional Co2 laser cutting machine, and the sheet cutting speed is more than three times that of YAG.
●Low maintenance cost: The high rigidity of the machine tool, the fiber laser source with advanced German technology and the 100,000-hour service life of key components ensure low maintenance costs.
|X/Y axis positioning accuracy||±0.05||mm|
|X/Y axis repeatable positioning accuracy||±0.03||mm|
|X/Y maximum positioning speed||80||m/min|
|Laser generator power||1000||W|
|Cutting capacity: carbon steel plate||
|Maximum acceleration of X/Y||1.5||G|
|Motion stroke (axis)||X||3020||mm|
|Number of phase||3|
The optical fiber metal laser cutting machine adopts the guide rail and heavy-duty frame imported from Taiwan, the servo motor and driver of Panasonic from Japan and the laser head of the American laser machine. All these parts match each other, and the stability of the machine is very good. Our fiber can not only cut stainless steel, carbon steel, but also some high-reflectivity materials, such as aluminum and copper. Meet the needs of some customers.
1. The world's top imported fiber laser has stable performance and the service life of key components can reach 100 hours.
2. Outstanding laser beam quality makes the cutting line more precise, higher working efficiency and better processing quality.
3. Adopt a fully enclosed constant temperature laser working environment to ensure stable work and more effective.
4. The special corner energy following technology makes the cutting effect of sharp corners better.
5. Possess Japanese advanced cutting head control technology, and has automatic fault alarm protection display function
, The cutting head is safer to use, more convenient to adjust, and the cutting effect is better.
6. The special punching gas control technology solves the punching problem of thick plates.
7. Equipped with high-precision, high-responsive drivers, suitable for fast and precise cutting.
8. Equipped with an automatic refueling system to make the machine operation more stable.
Material range of fiber laser machine
It is mainly used for cutting stainless steel, carbon steel, silicon steel, aluminum alloy, titanium alloy, copper, galvanized sheet, pickling sheet and other metal materials
The limit of fiber metal laser cutting machine
1. Fiber laser cutting machine is widely used in metal processing industry, but it also brings some defects. Due to the small focus point, the cutting seam is very thin. Therefore, under the action of the auxiliary blowing force, the lung-dissolving metal cannot be taken out, which solidifies on the reverse cutting seam to form attached slag. Therefore, even AMADA manufacturers should emphasize the optimal cutting thickness below 7mm when promoting 4000W fiber laser cutting machine. If you want to cut paper over 7mm, we recommend using a carbon dioxide laser cutting machine. Therefore, CO2, YAG or fiber laser cutting machine should be used reasonably according to the user's cutting requirements, cost and capital.
2. It is especially suitable for enterprises to cut complex patterns of plates. The medium power fiber laser cutting machine is a good choice. However, because the laser reflection is very harmful to the fiber laser source, it is not recommended to use the 2000W fiber laser cutting machine below. For cutting high-reflectivity materials such as aluminum and copper. And many manufacturers cannot guarantee that cutting aluminum and copper will damage the laser source. If you want to cut aluminum and copper foil paper, it is recommended to use YAG laser cutting machine. Especially for cutting copper, HE YAG metal laser cutting machine is your best choice. Currently, it is the only manufacturer of medium power metal laser cutting machine for cutting thick copper.
Contact Person: Emily Meng