Workpieces with more holes: for some workpieces with more holes, laser cutting equipment is used to face specific plate thickness, as long as the diameter of the workpiece is larger than or equal to the value of the corresponding minimum diameter, and the roughness and diameter dimensions are required to use laser cutting equipment to direct the blanking in the range of the cutting machine's guaranteed energy. The point function of the laser cutting equipment determines the position of the hole, saves the time of the positioning hole for the drilling procedure of the subsequent holes, and also saves the cost of making the drill template, which not only improves the production efficiency, but also improves the precision of the product.
Slender workpiece: slender workpiece has certain requirements for straightness. The heat generated by laser cutting equipment is concentrated, and the heat affected zone is smaller. When the length of the long workpiece reaches more than 5500mm, the straightness of the workpiece can be effectively controlled by the "micro connection" function of the cutting equipment, and the thermal deformation of the workpiece can be effectively controlled.
Work sample plate: laser cutting equipment for a number of irregular shape of the workpiece to produce testing sample plate, such as the bulldozer loosen the angle of the excavator, excavator bucket and the big head on the arm, can improve the accuracy and efficiency of the detection of the material. There are also some roll forming parts. In the production and testing of the workpiece, it is necessary to use the sample plate which is consistent with the arc phase, such as the arc plate of the bulldozer, the bucket of the excavator and the bending plate of the arm and the dug, etc. this time the line function of the laser cutting equipment can also be used to mark the boundary between the arc and the straight edge.
The crack arrest groove groove: the sheet metal process is also called for crack or hole groove. For some workpieces requiring high can use laser cutting equipment for cutting form. For some special forms, laser cutting equipment can be used to reserve a slotting when the workpiece is cut off, so as to prevent the workpiece from deforming when bending.