Payment & Shipping Terms:
|Cutting Range(L*W):||2500mm × 1300mm||Z Axle Stroke:||100 Mm|
|Max Positioning Speed:||120m/min|
Automatic focus follow up system
1,Sampling rate 1000 times/sec, max following speed 500mm/sec
2,Height following control range 0-10mm
3,Statics inspection accuracy 0.001mm, dynamic responding accuracy 0.02mm
4,Support network communication and upgrade with flash disk
5,Support functions of oscilloscope, survey the electric capacity and height in real-time
|Laser source medium||Fiber|
|Cutting range(L*W)||2500mm × 1300mm|
|Z axle stroke||100 mm|
|Max positioning speed||120m/min|
|Max height of feeding material||more than 120mm|
|Cooling form||water cooling|
|Min. cutting gap||≤0.1mm|
|Positioning accuracy of X, Y and Z axles||±0.03 mm|
|Repeated positioning accuracy of X, Y and Z axles||±0.01 mm|
|Drive model||Imported servo motor|
|Continuous working time||24 Hours|
|Outer dimension||4270mm x2280mm x 1750mm|
|Total protection level of power supply||IP54|
Laser cutting advantages over other thermal cutting methods
1. Fast cutting speed:
The cutting speed can be up to 600 cm/min when using 1200W laser to cut 2mm low carbon steel plate, and can up to 120 m/min when cutting 5mm polypropylene resin plate. Material does not need clamping fixed for cutting, thus can save the jig and auxiliary time for material upload and download.
2. Non-contact cutting:
There is no contact for work piece and laser head, so there is no tool wear. No need to change "tool" for different shapes parts processing, only need to change the output parameters. Laser, low noise, small vibration, and no pollution while cutting.
3. Variety cutting material:
Compared with oxyacetylene cutting and plasma cutting, laser can cut many kinds of materials, including metal, nonmetal, metal and nonmetal based composite material, leather, wood, fiber, etc. But for different material, it shows different laser cutting adaptability due to its thermal physical properties and different laser absorption rate.
Precision and Wear Resistance Screw Drive System
1 Smooth rolling, small friction coefficient, no empty rollingeven in micro feeding, realize nanometer located accuracy.
2 The frictional resistance of rolling is small, and the structure is simple, low abrasion of friction contact surface, thus realize the long time walking accuracy.
3 Optimal design of geometric mechanics structure, steel balls of 45° array, could not only bear the power of warp, anti-warp and cross directions at the same time, but also assure the walking accuracy.