|
Product Details:
Payment & Shipping Terms:
|
Product Name: | Fiber Laser Metal Cutting Machine | Medium Of Laser: | Fiber |
---|---|---|---|
Cooling Method: | Water Cooling | Processing Material: | Stainless Steel, Carbon Steel, Alloy Steel, Silicon Steel, Spring Steel, Galvanize Plate, Pickled Plate, Brass Plate, Copper Plate, Aluminum Plate, Etc |
Control System: | CNC | Graphic Format Supported: | ".bmp", ".dwg", ".dxf" ,etc |
Continuous Working Time: | 24 Hours | Cutting Speed: | 42 M/min |
Warranty: | 2 Years | After-sales Service Provided: | Engineers Available To Service Machinery Overseas |
High Cost effective Metal Laser Cutter Brass High Power
Description
Precision and Wear Resistance Screw Drive System
1. Smooth rolling, small friction coefficient, no empty rollingeven in micro feeding, realize nanometer located accuracy.
2. The frictional resistance of rolling is small, and the structure is simple, low abrasion of friction contact surface, thus realize the long time walking accuracy.
3. Optimal design of geometric mechanics structure, steel balls of 45° array, could not only bear the power of warp, anti-warp and cross directions at the same time, but also assure the walking accuracy.
GS-LFD3015 Metal Laser Cutter.pdf
Specifications
Model |
GS-LFD6020 |
Output power of laser source |
1500W~4000W |
Cutting range (L * W) |
6000 mm × 2000 mm |
Z axle stroke |
120 mm |
Max. positioning speed |
120 m/min |
Cooling |
water cooling |
Max accelerated speed of X, Y axles |
1.2 G |
Kerf Width |
± 0.1 mm |
Positioning accuracy of X, Y and Z axles |
± 0.03 mm |
Repeated positioning accuracy of X, Y and Z axles |
± 0.02 mm |
Processing precision of work piece |
± 0.1 mm |
Kerf harshness |
Ra 3.2—12.5 μm |
Min setting unit |
0.001mm |
Control System |
Ahead Tech (USA) |
Voltage |
380V,50 / 60Hz |
Continuous working time |
24 Hours |
Machine weight |
About 9750Kgs |
Total installed capacity |
20-25 KVA |
Total protection level of power supply |
IP54 |
Installation Requirements
1 | Gas | Cutting Gas | N2>99.5% | The parameter is different according to different material |
O2>99.5% | ||||
Air pressure not less than 0.8MPA | ||||
2 | Work Environment | Temperature | 0-40°C | |
Moisture | <90% | |||
Ground Base | There should be no epicenter nearby, the ground bearing strength should be no less than 2000kg/m2, ground evenness < 5mm. Concrete layer should be no less than 350mm, concrete mark no less than 425 # |
Shockproof slot is needed if there’s epicenter |
||
3 | Metal Board | Carbon board, stainless steel board of good quality and without rust |
Applications
Widely used in sheet metal processing, aviation, aerospace, electronics, electrical appliances, tube fittings,
automobile, food machinery, engineering machinery, precision parts, ships, metallurgical equipment, elevators,
household appliances, kitchen utensils and appliances, craft gifts, tool processing, decoration, advertising and
other manufacturing industries.
Other Porducts