Payment & Shipping Terms:
|Product Name:||Fiber Laser Metal Cutting Machine||Medium Of Laser:||Fiber|
|Cooling Method:||Water Cooling||Processing Material:||Stainless Steel, Carbon Steel, Alloy Steel, Silicon Steel, Spring Steel, Galvanize Plate, Pickled Plate, Brass Plate, Copper Plate, Aluminum Plate, Etc|
|Control System:||CNC||Graphic Format Supported:||".bmp", ".dwg", ".dxf" ,etc|
|Continuous Working Time:||24 Hours||Cutting Speed:||42 M/min|
|Warranty:||2 Years||After-sales Service Provided:||Engineers Available To Service Machinery Overseas|
Aluminium 2000w Fiber Laser Metal Cutting Machines Using Us Operation Software
Specialized Highly Follow-up Sensor
Auto tracing system, rapid reflect, accurate location.
1 Sampling rate is up to 1000 times/s, max. Tracing speed is up to 500mm/s.
2 Highly follow-up control range is 0-10mm.
3 Static detection accuracy is 0.001mm, dynamic detection accuracy is 0.02mm.
4 Network communication, update on-line.
5 Oscilloscope function, detects the change of capacitance and height in real time.
6 Warning when panel is collided and lack, prevent accidental collision to the laser head.
|Laser source medium||Fiber|
|Cutting range (L * W)||3000 mm × 1500 mm|
|Z axle stroke||250 mm|
|Max. positioning speed||120 m/min|
|X,Y axle Max. accelerate speed||1.2G|
|Cooling form||Water cooling|
Output power of laser source
1000W / 1500W / 2000W
2500W / 3000W / 4000W
|Min. cutting gap||≤ 0.1 mm|
|Positioning accuracy of X, Y and Z axles||± 0.03 mm|
|Repeated positioning accuracy of X, Y and Z axles||± 0.01 mm|
|Thickness of cutting material (according to material)||0.2 - 25 mm|
|Drive model||Imported servo motor|
|Power requirement||380 V, 50/60 Hz|
|Continuous working time||24 Hours|
|Machine weight||About 12130 Kgs|
|Total protection level of power supply||IP54|
With the Wireless Controller which is especially designed for the cutting machine, the remote control of cutting and processing for carbon board and stainless steel board is feasible to improve the work efficiency
1 Displaying function: Real-time showing of workpiece coordinate, mechanical coordinate for both X and Y axis, also it can show the cutting speed and stepping value
2 Set up the coordinate of workpiece, back to the working origin, back to the mechanical origin, feeding speed adjustment, stepping value and etc
3 Laser power control: Laser switch, pump control switch
4 Adopt with wireless transfer technique of high performance, frequency-hooping transfer, data with code, good anti jamming ability and stability.
5 Battery is long service life time with low power consumption design
Technical Train Content:
1. Safety Train
2. Basic Knowledge Train
3. Structure of laser route, test, safety regulation and maintenance
4. CNC system principle, operation, programming, failure diagnose and notice
5. Machine tool operation, daily maintenance, electric control and maintenance
6. Basic knowledge of metal heat treatment and laser heat treatment technique
More than three years factory working experience
Trainee is not allowed for our machine operation until the approval of written test and live operation.
One people regarding each of following field including Machinery, CNC/electric automatic, optics and material heat treatment technique.