Payment & Shipping Terms:
|Product Name:||Laser Cladding Heat Treatment Equipment||Output Rating:||6KW|
|Discharge Mode:||Needle Plate Discharge||Output Mode:||Continuous Wave Output|
|Output Wavelength:||10.6μm||Power Supply:||65KW;|
laser cladding machine manufacturer/supplier, China laser cladding machine manufacturer & factory lis
Laser heat treatment: widely used in the automotive industry, such as cylinder liner, crankshaft, piston rings, commutators, gears and other components of the heat treatment, while in the aerospace, machine tool industry and other machinery industry is also widely used. China's laser heat treatment is much broader than abroad. At present, most of the lasers are YAG lasers and CO2 lasers.
Laser complete sets of equipment
Technical parameter of each part
HAN'SGS-TFL-6K laser source
Discharge mode: needle plate discharge;
Output mode: continuous wave output;
Output power adjustment range:200—6000W;
beam divergence angle:≤5mrad;
High-power CO2 laser
1.GS-TFL-10000 high-power cross-flow CO2 laser is a fast circular gas flow circulating laser with horizontal needle plate discharge. The laser has high power, high efficiency, high beam quality, long life, good stability, compact structure, low cost, easy maintenance and so on.
2.The laser series can be used for laser heat treatment, welding, and surface alloying applications, processing of various metal and non-metallic materials. The beam directionality, energy density and processing precision, in the industrial, national defense, scientific research and other fields have a wide range of applications.
Equipment safety precautions
Before installing and using the laser package, the user must understand the entire contents of this section, and also recommends that users comply with the national safety guidelines on the use of lasers.
1) Failure to follow the safety guidelines while using the laser may result in the following hazards:
1, eye and skin by the laser beam radiation damage
2, the fire broke out
3, toxic smoke pollution
4, fatal electric shocks
5, mechanical injury
Do not close the light outlet when the machine is running
Basic equipment composition
1. Cross-flow CO2 laser: 6K/10K;
2. Triaxial flight light path: X=2000; Y=600; Z=500
3. Load-bearing 5T horizontal rotary table;
4. Gravity feeder (paraxial feed);
5. SIMENS 808D CNC system;
6. Auxiliary system.
Steel industry laser application point
Commonly used roller laser processing effect
Forged steel roller - Using laser quenching and fusion quenching technology, the hardness can be obtained on the forged steel roller surface 59-
63HRC, a hardened layer with a depth of 2 mm or more, which greatly improves the life of the roll
Life. Using laser cladding technology can also repair the roller surface and journal.
Cast steel roller - using laser quenching and fused quenching technology, can obtain a hardness of 59- in the surface of the cast steel roller
63HRC, a hardened layer with a depth of 2 mm or more, significantly extends the life of the roll. use
Laser cladding technology can also repair roll surfaces and journals of rolls.
Alloy semi-steel roll - after laser quenching, fused quenching, alloying, the surface hardness can be corresponding
Raise to 45-54 HRC. For strip steel rough rolls, medium rolls, etc. made of steel and rods and rods
The rough-rolling and medium-sized rolls have a significant effect. Using laser cladding technology can also roll axis
The neck is repaired.
Cast Iron Rollers - Laser hardening, fused quenching and laser alloying technology, available on chilled cast iron rolls,
Infinite chilled cast iron rolls have a hard, hard red hardened layer and can therefore be large
Increase the roll life. Laser Cladding Technology for Cast High Chrome Steel Rolls
The journal was repaired.