Payment & Shipping Terms:
|Name:||Round Tube & Sheet Laser Cutting Machine||Model:||GS-LFTP6015|
|Keyword:||Round Tube Laser Cutting Machine||Control Cabinet:||HANS GS|
|Z Axle Tracking System:||Ray Tools (Switzerland)||Cutting Head:||Ray Tools (Switzerland)|
Factory direct low-cost round tube & sheet laser cutting machine 1000w/1500w/2000w
Laser cutting advantages over other thermal cutting methods
1. The cutting quality is good:
Because of the small laser spot, high energy density, fast cutting speed, laser cutting can therefore get better cutting quality.
(1) Cutting knife is narrow and parallel on both sides, also perpendicular to surface, dimensional accuracy of cutting pieces can be up to + / - 0.05 mm.
(2) Cutting surface is smooth and beautiful, the surface roughness is only a few dozen microns, laser cutting can be used as the final working procedure, parts can be even used directly without mechanical processing.
(3) Heat affected zone is very small, material performance is hardly affected near the kerf width , and the workpiece deformation is small. Also, kerf geometry is good , slitting rectangular cross-section shapes appear to be regular.
2. Highly automation:
Adopts digital control, you only need to use CAD to draw the picture and import to specialized software, laser cutting machine can cut out the artifacts you need, moreover there is intelligent typesetting function, thus can save raw material costs to the greatest extent.
3. High cutting efficiency:
Due to the transmission properties of laser, laser cutting machine has equipped with many sets of CNC work bench to realize numerical control. You only need to change the CNC program to cut different shape, as well as for two-dimensional cutting, and three-dimensional cutting.
4. Fast cutting speed:
The cutting speed can be up to 600 cm/min when using 1200W laser to cut 2mm low carbon steel plate, and can up to 120 m/min when cutting 5mm polypropylene resin plate. Material does not need clamping fixed for cutting, thus can save the jig and auxiliary time for material upload and download.
5. Non-contact cutting:
There is no contact for work piece and laser head, so there is no tool wear. No need to change "tool" for different shapes parts processing, only need to change the output parameters. Laser, low noise, small vibration, and no pollution while cutting.
6. Variety cutting material:
Compared with oxyacetylene cutting and plasma cutting, laser can cut many kinds of materials, including metal, nonmetal, metal and nonmetal based composite material, leather, wood, fiber, etc. But for different material, it shows different laser cutting adaptability due to its thermal physical properties and different laser absorption rate.
|Output power of laser source||500W/1000W|
|Cutting area (L*W)||6000mm × 1500mm|
|Max tube diameter||300mm|
|Max tube processing length||6m|
|Max tube cutting thickness||5mm|
|X axle stroke||6048 mm|
|Y axle stroke||2300 mm|
|Z axle stroke||100 mm|
|Max accelerated speed of X, Y axles||1G|
|Kerf Width||0.1~0.3 mm|
|Positioning accuracy of X, Y and Z axles||±0.05 mm|
|Repeated positioning accuracy of X, Y and Z axles||±0.03 mm|
|Processing precision of work piece||±0.1 mm|
|Kerf harshness||Ra 3.2-12.5 μm|
|Continuous working time||24 Hours|
|Max bearing weight of working platform||600Kgs|
|Total installed capacity||20-25 KVA|
|Total protection level of power supply||IP54|
Standard Configuration of GS-LFTP6015 Laser Cutter
|2||CNC Control System||Fscut|
|3||Z axle Tracking System||Ray Tools (Switzerland)|
|4||Cutting Head||Ray Tools (Switzerland)|
|5||Serve Motor and Drive System||Fuji(Japan)|
|7||Planetary gear reducer||Shimpo(Japan)|
|9||Control cabinet||HANS GS|
Han's Laser - Asia's largest, world-famous laser processing equipment manufacturer Named by Forbes as one of China's most potential enterprises for 4 years in a row (2005-2008).
The first listed company with laser as the main operation in China;With the largest output and sales volume of laser processing equipment in the world;National Pilot Innovative Enterprise;National Key High-tech Enterprise;National Torch Plan unit, 863 Plan Project unit;National Model Enterprise Focusing On Promoting Scientific and Technical Payoffs;Key Software Enterprises Under the National Planning.
Hans Goldensky Laser System Co., Ltd. is one of the four manufacturing base of Han's Laser Technology Industry Group Co., Ltd.