Payment & Shipping Terms:
|Application:||Laser Cutting||Type:||Fiber Laser Cutting Machine|
|X Axle Stroke:||6048 Mm||Y Axle Stroke:||2300 Mm|
|Z Axle Stroke:||Water Cooling||Continuous Working Time:||24 Hours|
1000W Fiber Laser Cutting Machine Manufacturer of laser cutting machine in China
Laser cutting advantages over other thermal cutting methods
1. The cutting quality is good:
Because of the small laser spot, high energy density, fast cutting speed, laser cutting can therefore get better cutting quality.
2. Non-contact cutting:
There is no contact for work piece and laser head, so there is no tool wear. No need to change "tool" for different shapes parts processing, only need to change the output parameters. Laser, low noise, small vibration, and no pollution while cutting.
3. Variety cutting material:
Compared with oxyacetylene cutting and plasma cutting, laser can cut many kinds of materials, including metal, nonmetal, metal and nonmetal based composite material, leather, wood, fiber, etc. But for different material, it shows different laser cutting adaptability due to its thermal physical properties and different laser absorption rate.
|Output power of laser source||500W/1000W/1500W|
|Cutting area (L*W)||6000mm × 1500mm|
|Max tube diameter||300mm|
|Max tube processing length||6m|
|X axle stroke||6048 mm|
|Y axle stroke||2300 mm|
|Z axle stroke||100 mm|
|Max accelerated speed of X, Y axles||1G|
|Positioning accuracy of X, Y and Z axles||±0.03 mm|
|Repeated positioning accuracy of X, Y and Z axles||±0.01 mm|
|Kerf harshness||Ra 3.2—12.5 μm|
|Continuous working time||24 Hours|
|Max bearing weight of working platform||600Kgs|
|Total installed capacity||20-25 KVA|
|Total protection level of power supply||IP54|
Coaxial auxiliary gas system
The gas control valve is installed inside the gas source cabinet and gas route system. Automatic switch by electric control and high-low pressure control valve with manual adjustment. Three kinds of working gas are provided in the gas route system (O2,N2,compressed air). The working gas is used for cutting for different kinds of material, O2 is used of cutting of black metal and others, N2 is used for SS cutting, the cutting surface is without Oxidation edge. The compressed air is used for the power of pneumatic component.
Widely used in sheet metal processing, aviation, aerospace, electronics, electrical appliances, tube fittings, automobile, food machinery, engineering machinery, precision parts, ships, metallurgical equipment, elevators, household appliances, kitchen utensils and appliances, craft gifts, tool processing, decoration, advertising and other manufacturing industries.